F.I.V. E. Bianchi Spa in Treviglio (BG) – Italy, Via delle Battaglie, 5 in its capacity of Manufacturer wishes to thank you for choosing one of its bicycles or frames from ‘Reparto Corse’ (here also referred to as “The Product”). All the bicycles and the frames from Bianchi Reparto Corse are the result of advanced research, fine-tuned after participating in the most prestigious cycling competitions. The racing bikes and frames are meant to be used by those who require maximum performance and who are aware that their very special bicycle needs the greatest care in terms of maintenance. In order to maintain through time the same level of safety and efficiency of your Bianchi Reparto Corse bicycle or frame, your collaboration is essential. Please read thoroughly your Owner’s Manual supplied with your bicycle or frame, and make sure that all routine and special maintenance operations, as well as any technical ones, are carried out only by qualified personnel belonging to the Bianchi Dealer Network. Log on the website www.bianchi.com to find the complete list of Bianchi dealers.
The present Conventional Guarantee – as well as the guarantee legally due to be released by the Dealer is granted whenever one of the following conditions occur:
- The Product is featured in the Bianchi Reparto Corse range and it is purchased from one of the Bianchi Dealers listed on the website www.bianchi.com;
- The Purchaser has checked the bicycle with the Bianchi Dealer, before taking possession of the same, in order to make sure that the product fully meets his/her expectations, that it suits his/her physical characteristics and performance requirements, and therefore either sends an acceptance statement for the bicycle, attached to this Guarantee Booklet, duly signed, to F.I.V. E. Bianchi Spa in Treviglio, Via delle Battaglie, 5 or registers the Product on-line on the website www.bianchi.com within and no later than 10 days from the purchase date;
- The bicycle is used in accordance with its designed use, exclusively by the person it’s been assembled for, and conforming to the technical specifications related to the Product and its use, featured in the Owner’s Manual supplied with the Product itself;
- The Customer shows the fiscal receipt of the purchase of the Product from a Bianchi Dealer when requiring a service under guarantee.
Pre-delivery inspection service
Before delivering the bicycle or frame, the Bianchi Dealer carries out a pre-delivery inspection to make sure that the Product is in perfect conditions. We invite you to collaborate with your Bianchi Dealer in filling out the relevant form and answering a few simple questions that will help us getting to know you better and offering you an even better service. In any case please check yourself your new Bianchi bicycle to make sure it meets your expectations.
Safety and good operation of your bike or frame depend mostly on proper maintenance. Please read thoroughly the Operating and Maintenance Manual supplied with the Product and follow the advice contained therein carefully. We remind you that the guarantee does not cover all those defects caused by normal wear, wrong maintenance, improper use of the Product, damage caused by accident, transport etc., use of corrosive substances (including acid sweat) and, with regard to frames, the use of non compatible or unsuitable components. With regard to racing bikes and frames, either road or MTB, the guarantee is not valid in case of professional or equivalent use of the Product. In case the Product needs to be replaced within the guarantee period, if the same product is no longer available and/or discontinued, the Manufacturer reserves for himself the faculty to supply the Customer a similar product, although with the same value and technical features.
Warranty Terms as per https://www.bianchi.com/wp-content/uploads/2019/12/Warranty_Garanzia_Bianchi.pdf